2006 784 CU. IN. "PRO MODIFIED MOUNTAIN MOTOR"
WITH SONNY'S DESIGN GM HEMISPHERICAL CYLINDER HEADS

784 CU. IN. ENGINE WITH 1600 HP N/A (RAW HP) @ 7700 RPM
DESIGNED FOR TWO NITROUS SYSTEMS @ 14.0 TO 1 COMP.
TWO SYSTEMS WITH 34 N JETS 600 HP + 1500 = APPROX. 2100 HP

784 CU. IN. ENGINE WITH 1525 HP N/A (RAW HP) @ 7700 RPM
DESIGNED FOR THREE NITROUS SYSTEMS @ 13.0 TO 1 COMP.
THREE SYSTEMS, TWO WITH 34 N JETS + 200 HP, THIrD SYSTEM = APPROX. 2200 HP

Special Features:

•   Sonny's in-house fully CNC ported Pro Mod "Next Generation" Hemi cyl. heads
•   SAR Special Billet Aluminum 5.000" B.S. block with 1.000" raised cam
•   Bryant billet crank
•   BME 426 aluminum forged rods
•   Venolia pistons (14.0 to 1 comp)
•   1.094 tool steel taper-wall pins
•   Akerly & Childs tool steel rings
•   Special titanium valves & PSI springs
•   SAR shaft mounted rocker system with needle bearing roller tips
•   Jesel keyed lifters
•   Sonny's 60mm cam
•  Jesel belt drive
•   Moroso 4-stage dry sump oiling
•   Moroso vacuum system
•   ATI balancer
•   MSD cranktrigger ignition
•   SAR sheetmetal 4x2 intake with linkage
•   SAR/BLP (4) 2 barrel split dominator carbs
•   Sheetmetal billet rail valve covers
•   Fabricated inlet Y water manifold
•   Pro series CSI starter
•   Fuel lines with 4 port regulator for carburetion
•   Fabricated inlet Y water manifold
•   Fuel lines and regulator for NOS
•   Two or three SpeedTech nitrous systems (installed)
•   Drilled and tapped for third system

Complete and Dyno tested! ------------------------$77,750.00
With 3 Nitrous Systems-----------------------------$79,000.00