• Home
  • Engines
  • 784 CU. IN. "PRO MODIFIED MOUNTAIN MOTOR" 784 CU. IN. 2100 HP RACING ENGINE

784 CU. IN. "PRO MODIFIED MOUNTAIN MOTOR" WITH SONNY'S DESIGN GM HEMISPHERICAL CYLINDER HEADS

784 CU. IN. ENGINE WITH 1575 HP N/A (RAW HP) @ 7700 RPM
DESIGNED FOR TWO NITROUS SYSTEMS 14.0 TO 1 COMP.
Sonny's Design GM Hemispherical Cylinder Heads.

TWO SYSTEMS WITH 34 N JETS 600 HP + 1500 = APPROX. 2100 HP
Complete and Dyno Tested
PRICE $77,750.00
784 CU. IN. "PRO MODIFIED MOUNTAIN MOTOR" WITH SONNY'S DESIGN GM HEMISPHERICAL CYLINDER HEADS - Sonny's Racing Engines & Components
Click image to enlarge
Picture may show optional equipment
Features:
  • Sonny's in-house fully CNC ported Pro Mod GM "Next Generation" Hemispherical cylinder heads
  • SAR special Billet aluminum 5.000 B.S. block with 1.000" raised cam
  • Bryant billet crank
  • BME 426 or GRP aluminum forged rods
  • Venolia P/M pistons(14.0 to 1 comp)
  • 1.094 tool steel taper-wall pins
  • Akerly & Childs tool steel rings
  • Manley titanium valves & PSI springs
  • SAR/ shaft mounted rocker arm system w/ Needle bearing roller tips
  • 1 - 1/16" keyed lifters
  • Sonny's 60 mm cam
  • Jesel Belt drive
  • Moroso 4-stage dry sump oiling system
  • Moroso vacuum system
  • ATI balancer
  • MSD cranktrigger
  • SAR sheetmetal manifold with 4x2 linkage
  • (4) 2 barrel BLP dominator carburetors
  • Sheetmetal billet rail valve covers
  • Fabricated inlet "Y" water manifold
  • Pro series CSR starter
  • Fuel lines with 4 port regulator for carburetion
  • Fuel lines and regulator for NOS
  • Two or three SpeedTech nitrous systems (installed)
  • Drilled and tapped for third system
For Questions or Additional Information Call 434-239-1009 or Contact Us